THE THAI KITCHEN EXPLORER

Making tofu with a soy milk maker

How a soy milk maker helps you make homemade tofu, from blending soaked soybeans to stirring in a coagulant and pressing the curds into a firm block.

3 min read1 views
— · 0 votes
Contents
  1. What the soy milk maker does
  2. Coagulating the soy milk
  3. Pressing the curds into a block
  4. Tofu Questions for Soy Milk Maker Users
  5. Can I make homemade tofu with a soy milk maker?
  6. Do I need to strain the soy milk before coagulating it?
  7. Which coagulant works for tofu made in a soy milk machine?
  8. Why did my tofu turn out soft or crumbly?

Making tofu with a soy milk maker turns soaked soybeans into fresh curds you can press into a block at home. The appliance blends the beans and cooks the resulting soy milk in one cycle, which removes the long stove-top simmer. From there you add a coagulant, let the curds set, and press them. The page covers the soy milk maker's role, the coagulation step, and the pressing that gives tofu its texture.

What the soy milk maker does

A soy milk maker handles two jobs that would otherwise take separate pots and careful timing. The machine grinds soaked soybeans with water and then heats the mixture, so you get cooked soy milk without watching a stove. Some soymilk machines filter the pulp, called okara, as they work, while others leave you to strain it afterward. Check that your model can run a plain soy milk cycle, since that is the base for tofu.

Coagulating the soy milk

Tofu forms when a coagulant is stirred into hot soy milk and the proteins bind into curds. Gypsum, also called calcium sulfate, gives a softer set, while nigari, or magnesium chloride, sets firmer curds with a slight bite. Dissolve the coagulant in a little warm water first, then stir it gently into soy milk held around the temperature the maker finishes at. Stop stirring once curds appear and let the pot stand undisturbed so the curds and whey separate.

Pressing the curds into a block

Pressing decides how firm your finished tofu becomes. Line a mold or a colander with cheesecloth, ladle in the curds, and fold the cloth over the top. A light weight for a short press gives a soft, custardy block, and a heavier weight pressed longer gives a dense block that holds together in stir-fries. Pour off the whey as it collects, and rest the pressed block in cool water if you are not using it right away.

Tofu Questions for Soy Milk Maker Users

Can I make homemade tofu with a soy milk maker?

Yes, a soy milk maker gives you the cooked soy milk that homemade tofu starts from. The machine grinds and heats the beans, and you finish the job by adding a coagulant and pressing the curds. You still need cheesecloth and a mold or colander for the pressing step.

Do I need to strain the soy milk before coagulating it?

You should strain the soy milk so no gritty pulp ends up in the curds. If your soymilk machine filters during the cycle, the milk is already clear and you can go straight to coagulation. With an unfiltered model, pour the hot milk through cheesecloth or a fine mesh strainer first.

Which coagulant works for tofu made in a soy milk machine?

Gypsum and nigari both work for tofu made from soy milk maker output. Gypsum, or calcium sulfate, produces a tender block, and nigari, or magnesium chloride, produces a firmer one. Follow the dose on the coagulant package, because strength varies between products.

Why did my tofu turn out soft or crumbly?

Soft or crumbly tofu points to a problem in coagulation or pressing rather than in the soy milk maker. Soy milk that is too cool when the coagulant goes in sets poorly, and too much stirring breaks the curds apart. Press with a steadier weight and give the curds time to set before you ladle them.

Read next

Latest articles