How to use a Thai kitchen cleaver
Learn how to hold a Thai kitchen cleaver, make basic and advanced cuts, chop meat and bone, and work safely on a sturdy cutting board.
Contents
- What a Thai kitchen cleaver is for
- Holding the cleaver with pinch and hammer grips
- Choosing and setting up the cutting board
- Basic Thai cleaver cuts for beginners
- Chopping meat and bone with a cleaver
- Advanced cleaver techniques in Thai cooking
- How to safely use a cleaver
- Caring for the cleaver blade and handle
- Questions about using a Thai cleaver
- How do you use a meat cleaver on bone?
- Can a beginner learn to use a Thai cleaver?
- Can you cut vegetables with a cleaver knife?
- When should you use a cleaver instead of a chef's knife?
- Can you forge your own cleaver at home?
To use a Thai kitchen cleaver, pinch the blade near the handle and let its weight do the cutting. Guide the food with curled fingertips, and work on a thick, steady chopping block. The same tool slices vegetables, minces pork for larb and splits chicken bones.
- Use a pinch grip for slicing and a full hammer grip for chopping bone.
- Keep your guiding hand in a claw with fingertips tucked behind the knuckles.
- Work on a thick board that sits flat and does not slide.
- Let the cleaver's weight drop through bone instead of swinging it hard.
- Never try to catch a falling cleaver; step back and let it land.
What a Thai kitchen cleaver is for
A Thai kitchen cleaver is a heavy, rectangular knife used for both chopping and fine cutting. Thai cooks call the chopping version meed sab, which roughly means a knife for chopping. The deep blade, thick spine and solid handle give it weight that a chef's knife lacks.
Thai kitchen cleaver uses range from splitting duck to mincing pork for larb, a minced meat salad. The same blade slices lemongrass, crushes garlic with its flat side and scoops food into the wok. One tool can therefore handle much of the prep for a Thai meal.
The right moment to reach for a cleaver is when weight helps the cut. Bone-in meat, dense roots like galangal and large piles of mince all suit its heft. Delicate jobs such as peeling small shallots are easier with a small paring knife.
| Task | Technique | Grip |
|---|---|---|
| Slicing meat for stir-fries | Forward-and-down slice | Pinch grip |
| Cutting vegetables and herbs | Push-cut | Pinch grip |
| Mincing pork or garlic | Quick vertical chops | Pinch grip |
| Splitting chicken or duck | Weighted drop through joints | Hammer grip |
| Crushing garlic or lemongrass | Flat-blade press | Palm on the flat |
Holding the cleaver with pinch and hammer grips
The Thai cleaver grip for slicing is a pinch grip on the blade itself. Place your thumb and the side of your index finger on the blade, just ahead of the handle. Wrap the remaining three fingers around the handle so the tool feels like part of your arm.
A hammer grip, with all four fingers and the thumb around the handle, suits bone chopping. Holding further back adds leverage, while holding closer to the blade adds blade control. Keep the wrist firm but not locked, so the shock of each chop reaches the forearm.
Your other hand, the guiding hand, needs a grip of its own called the claw. Curl the fingertips under and rest the knuckles against the flat of the blade. The knuckles guide the cleaver sideways, and the tips stay out of the edge's path.
Choosing and setting up the cutting board
A cleaver needs a heavy cutting board that stays flat under repeated blows. Thai kitchens traditionally use a khiang, a thick round block cut across a tree trunk. End-grain wood like this absorbs impact and is gentler on the edge than glass or stone.
Chopping board safety starts with stopping the board from sliding or rocking. Lay a damp cloth or a thin rubber mat underneath before you begin. Check that the surface below is solid, since a wobbly counter turns every chop into a risk.
Board height affects both control and comfort during long chopping sessions. The surface should sit low enough that your elbow bends slightly as the blade meets the board. Keep the board clear of loose bowls, and push finished food aside with the spine of the blade.
Basic Thai cleaver cuts for beginners
Basic Thai cleaver cuts start with slicing, which uses a forward-and-down motion rather than a straight chop. Push the blade forward as it falls so the edge glides through the food. Thin slices of pork or chicken for stir-fries come out cleaner with this motion.
Cutting vegetables with a cleaver relies on a push-cut, with the front of the edge leading. Keep the blade close to vertical and move your claw back a little after each stroke. Long beans, cabbage and spring onions cut quickly this way without bruising.
Mincing with a cleaver means chopping straight down in quick, light strokes across a pile of food. Fold the pile over with the flat of the blade every so often and keep chopping. Beginners can practice the motion on garlic, chilies and herbs before mincing meat.
- Slice: push forward as the blade drops
- Push-cut: keep the blade vertical and move the claw back each stroke
- Mince: make quick vertical taps, fold the pile and repeat
- Crush: lay the blade flat, edge away from you, and press with your palm
- Scoop: slide the flat blade under chopped food to move it
Chopping meat and bone with a cleaver
Meat and bone chopping with a Thai cleaver depends on weight and aim, not force. Lift the cleaver to a moderate height and let it fall straight onto the mark. Swinging wildly sends bone fragments flying and can chip the edge.
To split a chicken or duck, find the joints first and cut through them where possible. Joints part with little effort, while solid bone needs a firm, decisive chop. When a bone resists, leave the blade lodged where it stopped. Lay your free palm flat on the spine and press down firmly to finish.
Chopping bone needs a heavy cleaver with a thick edge, not a thin slicing cleaver. Thin blades can chip or bend when they strike bone, especially frozen bone. Thaw meat fully before chopping, since frozen joints can deflect the blade unpredictably.
Advanced cleaver techniques in Thai cooking
Double-cleaver mincing is an advanced Thai cleaver technique for making fresh ground meat. The cook holds a cleaver in each hand and chops in a steady alternating rhythm. Hand-chopped pork for larb has a coarser, looser texture than machine-ground meat.
Learn double-cleaver mincing slowly, with light cleavers and a wide gap between the two blades. Start with one hand chopping while the other only folds the pile, then add the second blade. Speed matters far less than keeping both edges landing where you aim.
Flat-blade work is another advanced skill that uses the side of the cleaver rather than its edge. Bruising lemongrass, cracking peppercorns and flattening chicken breast all rely on a firm, controlled press or slap. Keep the edge turned away from your body and your palm on the flat, never near the edge.
How to safely use a cleaver
Knife safety with a cleaver begins with a sharp edge and a calm pace. A dull blade needs more force and slips off food more easily than a sharp one. Work at a speed where you can watch both the edge and your guiding fingers.
A falling cleaver should never be caught, because grabbing at it can cause a deep cut. Step back, move your feet and let the blade land on the floor. Store the cleaver in a block, a sheath or on a magnetic strip, never loose in a drawer.
Keep the cleaver out of a sink full of water, where the edge hides below the surface. Wash and dry it right after use, wiping along the flat with the edge turned away. Any deep cut while chopping needs medical attention from a trained professional.
Caring for the cleaver blade and handle
Cleaver blade and handle care keeps the tool safe and accurate in the hand. Carbon steel blades rust if left wet, so dry them and add a thin film of oil. Stainless blades resist rust better but still need drying to protect the handle.
Sharpening a cleaver for bone work calls for a wider edge angle than a slicing knife. A whetstone, meaning a flat sharpening stone, lets you set and keep that angle by hand. If you are unsure how to sharpen a heavy blade, a professional knife sharpener can do it.
A loose or cracked handle makes any cleaver unsafe to swing. Check that the blade sits tight and that the ferrule, the metal collar at the joint, holds firm. Stop using a cleaver with a wobbling handle until it has been repaired or replaced.
Questions about using a Thai cleaver
How do you use a meat cleaver on bone?
A meat cleaver cuts bone through a controlled drop from a moderate height, not a hard swing. Hold it in a hammer grip, aim at a joint where possible and let the weight do the work. Keep your guiding hand well clear of the spot where the blade lands.
Can a beginner learn to use a Thai cleaver?
Yes, a beginner can learn a Thai cleaver by starting with slicing and push-cuts on soft vegetables. The pinch grip and the claw hand come first, before any bone chopping. Moving slowly at first builds the blade control that faster work depends on.
Can you cut vegetables with a cleaver knife?
Yes, a cleaver knife handles vegetables well, from long beans to lemongrass and garlic. A heavy bone cleaver can feel clumsy for fine work, though. A lighter slicing cleaver makes thin vegetable cuts easier, while the heavy one is kept for bone.
When should you use a cleaver instead of a chef's knife?
A cleaver is the right choice when weight helps the cut, as with bone-in meat, dense roots or large batches of mince. A chef's knife suits fine slicing and detailed work near the tip. The square end of a cleaver gives less control for that kind of precise cutting.
Can you forge your own cleaver at home?
Not safely without training, because forging a cleaver is skilled blacksmithing work. The job needs a forge, an anvil, hammers and controlled heat treatment of the steel. Hot metal, quenching and grinding can cause serious burns and cuts. Knife making is best learned in person from a trained blacksmith rather than from written steps.