THE THAI KITCHEN EXPLORER

How to Choose a Sharpening Stone for Knives

A practical guide to choosing a sharpening stone for knives: grit, whetstone type, diamond stones, water stones and matching the stone to your knife steel.

3 min read3 viewsHow to Choose a Sharpening Stone for Knives
— · 0 votes
Contents
  1. Grit sets the job
  2. Water stones and oil stones
  3. Match the stone to the steel
  4. Questions about sharpening stone choice
  5. Which grit should I start with?
  6. Is a diamond stone better than a water stone?
  7. Do I need to soak a whetstone before use?
  8. How do I keep a sharpening stone flat?

Choosing a sharpening stone for knives means matching the abrasive to the job and to the steel. You pick a grit range for the edge you want, decide between a water stone, an oil stone or a diamond stone, and keep the stone flat. A whetstone in a medium grit removes metal to shape the edge, while a fine grit polishes it.

Grit sets the job

Grit describes how coarse the abrasive particles are, and it sets what the stone does. A coarse stone repairs a dull or damaged edge and shapes a new bevel. A medium stone sharpens the edge after shaping, and a fine stone refines and polishes it. A single medium stone handles the basic work, and a combination stone adds a second grit on its other face.

Water stones and oil stones

A water stone is soaked or splashed before use and cuts steel with a soft, muddy surface. An oil stone runs on a thin film of oil and holds its shape longer. A whetstone of either type needs flattening now and then to stay true. Water stones make a mess that you wipe up, while oil stones need the oil kept off your hands and tools.

Match the stone to the steel

Hard, wear-resistant knife steel rewards a diamond stone because the diamond abrasive cuts it without loading. Softer steel suits a water stone, which refreshes the edge quickly with light pressure. Very coarse diamond plates remove a lot of metal, so keep them for repairs and heavy reshaping. A fine ceramic or diamond stone finishes an edge for slicing and delicate work.

Questions about sharpening stone choice

Which grit should I start with?

A medium grit stone is the sound starting point for sharpening stone selection. It sharpens a dull edge without removing more metal than needed. Add a coarse stone for repair and a fine stone for polishing later. Choose the grit by the condition of the edge, not by a single number.

Is a diamond stone better than a water stone?

No single stone wins, because diamond and water stones do different jobs well. A diamond stone cuts hard knife steel fast and stays flat for a long time. A water stone gives more feedback and polishes an edge with ease. Many cooks keep one of each and use them for separate steps.

Do I need to soak a whetstone before use?

It depends on the stone, so read what its maker says. Many water stones need soaking until the bubbles stop, while others only need a splash. Oil stones take oil instead of water, and diamond stones work dry or with a little water. Using the wrong liquid on a stone can spoil its surface.

How do I keep a sharpening stone flat?

Flatten a sharpening stone on a flat plate or a sheet of abrasive paper on glass. Rub the stone across the abrasive until the surface looks even. A dished stone cannot hold a steady angle, so check it before each session. Flattening is routine care for any whetstone and keeps the edge consistent.

Read next

Latest articles