Cost of Hiring a Potter
See what drives a potter's fee for a custom Thai clay mortar or cooking pot: time, clay, glaze, firing, quantity and the terms of the commission.
Contents
- What a pottery commission fee covers
- How potters set an hourly rate or piece price
- Why Thai kitchen pieces change the price
- Size, quantity and design detail in custom ceramic pricing
- Firing, kiln losses and lead time
- Food safety and heat resistance worth paying for
- How to brief a potter for a clear quote
- Deposits, revisions and delivery costs
- Questions about hiring a potter
- How much does a potter charge for a custom clay mortar?
- Is a commissioned mortar more expensive than a store-bought one?
- Do potters charge by the hour?
- Can a potter make a clay pot I can use on the stove?
- Why do two potters quote such different prices for the same piece?
- Should I pay a deposit before a potter starts work?
The cost of hiring a potter depends mainly on time, materials, kiln firings and the number of pieces. A one-off Thai clay mortar or cooking pot carries more design work per piece than a matched set. No fixed price exists, so ask each potter for a written quote based on your exact piece.
- A potter's fee covers design, making, materials, firing and studio running costs.
- Ordering several matched pieces lowers the price of each one.
- Thick mortars, flameproof pots and food-safe glazes can raise the quote.
- Ask for a written, itemized quote before paying a deposit.
- Use a clay pot over a flame only if the potter confirms it suits direct heat.
What a pottery commission fee covers
A pottery commission fee covers far more than the clay inside the finished piece. The potter charges for design talks, throwing on the wheel, hand-building, trimming, glazing and firing. Each stage takes hands-on time, and some stages need a kiln that runs on fuel or electricity.
Materials in a custom ceramic piece include the clay body, glazes, oxides and kiln supplies. Special clay bodies, such as blends made for stovetop pots, can raise the material cost. Glaze chemicals and test tiles also add to the total when a new color is developed.
Overhead, meaning the running costs of a studio, is a hidden part of any potter's quote. Studio rent, kiln upkeep, tools and insurance all feed into the price of each piece. A potter who sells through a gallery may also build a retail margin into the figure.
| Cost component | What it includes |
|---|---|
| Design time | Sketches, sizing talks, test pieces |
| Making time | Throwing, hand-building, trimming, finishing |
| Materials | Clay body, glazes, oxides |
| Firing | First and glaze firings, kiln fuel or power |
| Overhead | Studio space, tools, kiln upkeep |
How potters set an hourly rate or piece price
Potters price commissions in three main ways: by the hour, by the piece or by the project. A potter hourly rate suits one-off work where the design time is hard to predict. The rate reflects skill, experience, local living costs and demand for that maker's work.
Per-piece pricing fits items a potter already knows how to make, such as a standard mortar. The maker knows roughly how long each piece takes and how many survive the kiln. A single clear figure per item makes comparing quotes between makers easier.
A project fee bundles design, making, firing and delivery into one agreed sum. Larger orders, such as a full set of serving bowls and curry pots, can suit this model. Ask what the fee includes, because extras like packing or redesigns may sit outside it.
Why Thai kitchen pieces change the price
Thai kitchen pieces often need features that add work and material compared with decorative pottery. A clay krok, the tall mortar used for som tam papaya salad, needs thick walls. Repeated blows from a wooden pestle call for a dense, well-fired clay body.
An earthenware cooking pot, called mor din in Thai, raises different questions for the potter. A pot meant to sit over a flame needs a clay body made to handle sudden heat. Sourcing or developing that kind of clay can push the price above that of a serving bowl.
Glazing choices also shape the price of Thai kitchenware made to order. Some mortars stay unglazed inside to keep a rough surface for grinding chilies and garlic. A fully glazed interior needs glazes tested for food contact, which adds time and material.
Size, quantity and design detail in custom ceramic pricing
Size drives custom ceramic pricing because large pieces use more clay and more kiln space. A wide mortar or a large soup pot also needs more skill to throw evenly. Bigger forms crack or warp more easily in drying, which raises the risk the potter carries.
Quantity changes the price per piece in a pottery commission. Design, test pieces and setup take roughly the same effort for one item or twelve. A matched set spreads that fixed work across many pieces, so each one costs less.
Design detail adds hours that show up directly in the final quote. Carved patterns, hand-painted motifs, custom handles and fitted lids all take extra steps. Matching several pieces closely in size and color also takes more care than making loose variations.
Firing, kiln losses and lead time
Kiln firing is a cost that buyers rarely see but still pay for in every commission. Many pieces go through a bisque firing, a first low firing that hardens the raw clay. A second glaze firing then melts the glaze and matures the clay body.
Kiln losses are part of every potter's pricing, even with careful work. A piece can crack, warp or pick up a glaze flaw during firing. Potters often make extra pieces to cover these losses, and that extra work sits in the price.
Lead time, the wait from order to delivery, depends on the potter's schedule and firing cycle. Clay must dry slowly before firing, so a rush order is hard to speed up. Some potters charge a rush fee when a job jumps ahead of other commissions.
Food safety and heat resistance worth paying for
Food safety deserves a clear discussion in any ceramic kitchenware commission. Glazes that touch food should be suited for food contact and free of lead or cadmium. Ask the potter which glazes are meant for food use and how they were tested.
Heat resistance needs the same attention when a pot will go on a stove or open flame. Ordinary stoneware or earthenware can crack from direct heat and cause burns or spills. Use a pot over a flame only when the potter confirms the clay body is made for it.
Paying for tested materials protects both your food and your kitchen. A lower quote can reflect untested glazes or a clay body chosen without cooking in mind. Compare quotes on what each potter states about food contact and heat, not on price alone.
How to brief a potter for a clear quote
A clear brief helps a potter give an accurate quote for a commissioned pottery job. Describe what the piece is for, such as pounding curry paste or serving nam phrik chili dip. Add rough sizes, the number of pieces and any color or texture you have in mind.
Photos and sketches help a potter judge the hours a piece will take. Show a mortar or pot you like, and point out what you would change. Mention how you plan to clean it, since dishwasher use affects glaze choice.
A written quote should list each cost the potter expects to charge. Look for the price per piece, the deposit, the expected wait and delivery costs. Ask how the potter handles a piece that fails in the kiln or misses the brief.
- State the use, such as pounding som tam or simmering soup
- Give rough sizes and the number of pieces
- Share photos or sketches of shapes you like
- Ask about food-safe glazes and heat use
- Request a written, itemized quote
- Agree on deposit, revisions and delivery in writing
Deposits, revisions and delivery costs
Deposits are a standard part of a pottery commission and protect the potter's time. The deposit covers design work and clay if a buyer cancels partway through. The size of the deposit depends on the potter and on how custom the piece is.
Revisions can add to the final bill when a design changes after work begins. A change to a sketch costs little, but a change after throwing may mean starting over. Agree in writing how many design changes the base price includes.
Delivery costs for finished pottery depend on the weight, size and distance of the shipment. Heavy, fragile clay mortars need careful packing, which takes time and material. Collecting the piece from the studio can remove this cost where that option exists.
Questions about hiring a potter
How much does a potter charge for a custom clay mortar?
No fixed price exists for a custom clay mortar, since each potter sets their own fee. Size, wall thickness, glaze choice and the potter's rate all shape the quote. Send the same brief to several potters to compare written quotes fairly.
Is a commissioned mortar more expensive than a store-bought one?
Yes, a commissioned mortar generally costs more than a factory-made one. The potter makes it by hand to your size and design, often as a single piece. Factory pieces spread tooling and setup across large production runs.
Do potters charge by the hour?
Some potters charge by the hour, while others quote per piece or per project. Hourly billing suits one-off designs where the making time is hard to predict. Ask for an estimate of total hours so the final bill holds no surprises.
Can a potter make a clay pot I can use on the stove?
Yes, some potters can make stovetop cooking pots, but only from a suitable clay body. The pot must be made from clay designed to handle direct heat. Ordinary pottery can crack over a flame, so confirm heat use with the potter before ordering.
Why do two potters quote such different prices for the same piece?
Two potters quote differently because their skill, studio costs and materials differ. One may use tested food-safe glazes or a flameproof clay body. Another may include delivery, extra pieces for kiln losses or design time in the fee.
Should I pay a deposit before a potter starts work?
Yes, many potters ask for a deposit before starting a commission. The deposit covers design time and materials if the order is cancelled. Get the deposit amount and refund terms in writing before you pay.