THE THAI KITCHEN EXPLORER

Cleaning Soot and Blackened Bottoms on Wok Exteriors

How to clean the blackened bottom and sooty outside of a carbon steel wok, what causes the marks, and when to leave the dark patina alone.

3 min read3 viewsCleaning Soot and Blackened Bottoms on Wok Exteriors
— · 0 votes
Contents
  1. Soap and water for everyday soot
  2. Heavy burnt residue and carbon
  3. Stove heat marks and patina
  4. Questions about wok exterior cleaning
  5. How do I clean the blackened bottom of a wok?
  6. How do I clean the burnt bottom of a wok?
  7. How do I clean wok exterior soot?
  8. Will cleaning the outside ruin the wok seasoning?

Cleaning soot and blackened bottoms on wok exteriors means removing loose carbon and grease from the outside of a carbon steel wok without stripping the dark patina that protects the metal. The burnt residue on a wok exterior comes from food, oil and stove heat marks that collect where the flame hits. A wok exterior is cleaned differently from the inside, because the outside is never seasoned for cooking and can take stronger scrubbing.

Soap and water for everyday soot

Warm water with a little dish soap removes fresh soot and greasy film from a wok exterior before it hardens. Scrub the blackened bottom with a nylon brush or a stiff sponge while the wok is still warm but cool enough to touch. Rinse the outside well and dry the whole wok over low heat so no water sits on the carbon steel. Soap on the exterior does no harm to the cooking surface inside, which stays seasoned.

Heavy burnt residue and carbon

A thick crust of burnt residue on a blackened bottom needs a scrubbing powder or a paste of baking soda and water. Work the paste into the carbon with a steel wool pad, keeping to the outside face of the wok. Stubborn patches can be softened first by simmering water in the wok, which loosens the layer from the far side. Rinse, then dry the wok on the stove and rub a thin film of oil over the exterior to slow new soot buildup.

Stove heat marks and patina

Stove heat marks on a wok exterior are a blue, purple or dark gray discoloration of the steel itself, not dirt. These heat marks are the metal reacting to flame and they do not scrub away without removing metal. The blackened bottom of a carbon steel wok also builds a carbon patina that shields the steel from rust. Leave an even dark layer in place and clean only loose soot, grease and sticky burnt residue.

Questions about wok exterior cleaning

How do I clean the blackened bottom of a wok?

Cleaning the blackened bottom of a wok starts with warm soapy water and a stiff brush to lift loose soot and grease. For a hard crust, scrub the outside with baking soda paste and a steel wool pad. Work only on the exterior, then dry the wok over heat and oil the outside lightly.

How do I clean the burnt bottom of a wok?

A burnt bottom on a wok usually softens if you simmer water inside the wok for a few minutes first. The heat loosens burnt residue on the far side so it lifts with a scrubbing pad and soap. Avoid grinding through the dark patina, because bare carbon steel rusts quickly once moisture reaches it.

How do I clean wok exterior soot?

Wok exterior soot comes off with warm water, dish soap and a nylon scrubber while the wok is warm. Soot is loose carbon from the flame, so it lifts easily before it mixes with oil into a sticky film. Dry the wok fully on the stove afterward so rust does not start on the cleaned steel.

Will cleaning the outside ruin the wok seasoning?

No, cleaning the outside of a wok does not touch the seasoning inside, which is a layer baked onto the cooking surface. Soap and scrubbing on the wok exterior are safe because that face is not used for food. Dry the whole wok and oil the outside thinly to keep the carbon steel protected.

Latest articles