Clay Tempering with Grog and Other Additives
How grog and mineral additives temper a clay body, what each one does for fired pots, and how the mix affects thermal shock resistance.
Contents
Clay tempering with grog and other additives is the practice of mixing fired, crushed clay or gritty minerals into raw clay to change how the body behaves when it is shaped and fired. A temper such as grog, sand or grit opens the clay, reduces shrinkage and helps a pot survive sudden heat. The pages below explain what each additive does and how to judge a mix for stove and cooking wares.
What grog does in a clay body
Grog is fired clay that has been crushed and graded, and potters also call it chamotte. Because grog has already been through the kiln, it shrinks far less than raw clay and holds the body together as it dries. This reduces cracking and warping in thick or hand-built pieces. Grog also leaves a toothy texture that helps a wet pot stand up while you shape it.
Sand and grit as mineral temper
Sand temper and grit work like grog by opening the clay, but they are minerals rather than fired clay. A gritty additive lowers the clay's shrinkage and gives water a path out during drying. The grain size matters more than the amount, since coarse grit opens the body more than fine sand does. Quartz-rich sand expands and contracts with heat, so a body with too much of it can crack in firing.
Tempering for thermal shock resistance
Thermal shock resistance is a clay body's ability to survive a fast change in temperature without cracking. A well-tempered body with grog or grit resists that shock because the particles interrupt the spread of a crack. This matters for cooking pot durability, where a pot moves from a hot fire to a cool surface. The clay, the amount of temper and the firing all work together, so no single additive decides the result.
Questions about clay tempering
What is a clay tempering material?
A clay tempering material is any additive mixed into raw clay to change its working or firing behavior. Grog, sand and grit are the tempering materials potters use for this purpose. Each one reduces shrinkage and helps the body resist cracking. The choice depends on the clay and on the pot you intend to make.
Why add grog to pottery clay?
Grog is added to pottery clay to cut shrinkage and hold the body together as it dries. Fired clay grog has already shrunk, so it does not pull the raw clay apart. It also gives texture that helps thick walls stand while you build them. A groggy body suits large or hand-built pots that would otherwise crack.
Does temper make a cooking pot last longer?
Temper helps a cooking pot resist thermal shock, which is one cause of failure in a fired pot. Grog and grit interrupt cracks that start when the pot heats or cools quickly. The clay body and the firing still set the limit, so temper alone does not decide durability. A pot that is heated gently lasts longer than one shocked by sudden heat.
Can I use sand instead of grog?
Sand can replace grog as a temper, but it behaves differently in the clay body. Sand is a mineral that expands with heat, while grog is fired clay that has already been through the kiln. Coarse grit opens the body more than fine sand, so grain size changes the result. Test a small batch before you commit a whole supply of clay to a new mix.