THE THAI KITCHEN EXPLORER

Choosing a cast iron griddle plate for a gas grill or gas BBQ

How to pick a cast iron griddle plate for your gas grill: measuring burner fit and grate size, judging thickness, heat distribution, seasoning and care.

8 min read2 viewsChoosing a cast iron griddle plate for a gas grill or gas BBQ
— · 0 votes
Contents
  1. What a cast iron plate adds to gas grilling
  2. Measure the grill grate size before buying
  3. Burner fit and heat distribution across the plate
  4. How thickness and weight affect cooking
  5. Surface, edges and grease drainage features
  6. Raw, pre-seasoned or enameled cast iron
  7. Using a griddle plate safely on a gas BBQ
  8. Seasoning, cleaning and storing the plate
  9. Cast iron griddle plate questions
  10. Can you put a cast iron griddle plate on a gas grill?
  11. Do I need to remove the grates to use a griddle plate?
  12. Can I close the lid with a cast iron griddle on a gas BBQ?
  13. Why did my cast iron griddle crack on the grill?
  14. What oil should I use to season a cast iron griddle plate?
  15. Can I cook pad Thai on a cast iron griddle plate?

A cast iron griddle plate for a gas grill should fit the grates and leave room for airflow. After fit, judge thickness, edges, grease drainage and how evenly the plate spreads burner heat. The right plate turns a gas BBQ into a flat-top for eggs, flatbreads and Thai fried noodles.

  • Measure the grate area and leave a gap around the plate for airflow.
  • Match the plate to the burners so heat spreads evenly across the surface.
  • Weigh heat retention against preheating time and weight when choosing thickness.
  • Pick a design with a grease channel that drains away from the burners.
  • Preheat gradually and follow the grill maker's guidance on lid use.

What a cast iron plate adds to gas grilling

A cast iron griddle plate gives a gas grill a solid, flat cooking surface over the burners. Food that would slip through grate bars sits safely on the plate instead. Thin cuts, small pieces and batters cook in full contact with hot metal.

Cast iron holds heat well, so the surface stays hot when cold food lands on it. That stored heat produces a deep brown crust on meat, vegetables and flatbreads. Gas burners alone give quick, adjustable heat, but open grates let much of it escape.

A cast iron griddle plate for a gas BBQ opens the door to Thai street-style cooking outdoors. Fried noodles, sliced pork, shrimp and roti all cook evenly on a hot griddle. Cooking oily, smoky dishes outside keeps strong smells and spatter out of the indoor kitchen.

Measure the grill grate size before buying

Grill grate size is the first measurement to take before choosing a cast iron griddle. Measure the width and depth of the cooking grates, not the outer body of the grill. Note the shape of the firebox, the metal box that holds the burners and grates.

A griddle plate should sit flat and stable on the grates or the grate supports. Leave a gap between the plate and the firebox walls on every side. That gap lets hot air and combustion gases escape instead of building up under the lid.

Many grill makers state how much of the cooking area a griddle may cover. Check the manual for your model before picking a plate that fills the grill completely. A plate that covers every burner leaves no cooler zone for resting cooked food.

  • Measure grate width from side to side
  • Measure grate depth from front to back
  • Note the firebox shape around the grates
  • Check the lid clearance above the grates
  • Read the manual for griddle coverage limits

Burner fit and heat distribution across the plate

Burner fit describes how a griddle plate lines up with the burners beneath it. Each burner sends heat up in a strip, and the plate spreads it sideways. A plate centered over two burners heats more evenly than one hanging off a single burner.

Heat distribution on a cast iron plate depends on thickness, size and burner layout. Zones directly over flames run hotter, while the edges and gaps between burners stay cooler. Those differences are useful when you want a searing zone and a gentle zone.

Test a new plate by sprinkling a thin layer of flour across the heated surface. Watch where the flour browns first to map the hot and cool areas. Adjust each burner knob separately until the surface heats the way your recipes need.

How thickness and weight affect cooking

Thickness controls how a cast iron griddle plate stores heat and recovers after food goes on. A thicker plate holds more heat and resists warping, but needs longer to preheat. A thinner plate heats faster and responds sooner when you turn the burners down.

Weight follows thickness, and a large cast iron plate can be heavy to lift. Consider who will lift the plate off the grill and where it will be stored. Sturdy side handles make a hot, heavy plate easier to grip with heat-resistant gloves.

Check that the grill's grates and supports can carry the plate's weight. Lightweight grates on small gas BBQ units may bend under a heavy slab of iron. The grill manual may list a load limit or approved accessories for the model.

Surface, edges and grease drainage features

Surface design changes what a cast iron griddle plate does well on a gas grill. A fully flat face suits eggs, pancakes, rice and noodles that need even contact. A reversible plate with one ribbed side adds grill marks for meat and vegetables.

Raised edges or a low lip keep oil, sauce and small pieces from sliding off. A grease channel or drain hole guides fat away from the cooking area. Make sure any drain points toward a cup or tray, not onto the burners.

Fat dripping into the firebox can cause flare-ups, meaning sudden bursts of flame from burning grease. Clean grease trays and drip cups often to lower the risk of a grease fire. Keep a suitable fire extinguisher nearby, and never use water on burning oil.

Raw, pre-seasoned or enameled cast iron

Raw cast iron arrives bare and needs seasoning before its first use on the grill. Seasoning means baking thin layers of oil onto the metal until they form a hard coating. Raw plates build a slick surface over time and tolerate metal spatulas well.

Pre-seasoned cast iron comes with a factory coat of baked oil already applied. The coating lets you cook sooner, though a few extra rounds of oil still help. Early cooking with fatty foods strengthens the layer on a pre-seasoned plate.

Enameled cast iron has a glassy coating that resists rust and needs no seasoning. Enamel can chip if struck with metal tools or heated hard while empty. Check the maker's guidance on direct flame and high heat before using an enameled plate outdoors.

FinishPrep before useStrengthsWatch for
RawFull seasoningTough and can be re-seasonedRust if left wet
Pre-seasonedLight extra oilingReady to cook soonerThin early coating
EnameledNoneResists rust, easy to wipeChipping and heat limits

Using a griddle plate safely on a gas BBQ

Safe use of a cast iron griddle on a gas BBQ starts with gradual preheating. Start the burners low and raise the heat in steps rather than blasting a cold plate. Sudden temperature changes can crack cast iron or warp thinner plates.

Lid use with a griddle in place depends on the grill maker's instructions. A closed lid over a plate that covers most burners can trap excessive heat. Trapped heat may damage the lid, the knobs or nearby parts of the grill.

Gas safety comes before any cooking accessory on the grill. If you smell gas, shut off the supply and keep every flame away. Have a qualified gas technician inspect the hoses, regulator or burners before using the grill again.

Seasoning, cleaning and storing the plate

Cleaning a cast iron griddle plate is easier while the surface is still warm. Scrape off food with a flat metal scraper, then wipe the plate with paper towels. Avoid pouring cold water on a hot plate, since thermal shock can crack the iron.

Re-oiling after each cook keeps a seasoned plate protected between uses. Heat the clean plate briefly to drive off moisture, then wipe on a very thin oil layer. Excess oil turns sticky, so buff the surface until it looks almost dry.

Storage matters because moisture is the main cause of rust on cast iron. Keep the plate in a dry, covered place rather than outside on the grill. If rust spots appear, scrub them off and season that area again.

Cast iron griddle plate questions

Can you put a cast iron griddle plate on a gas grill?

Yes, a cast iron griddle plate works on a gas grill when it fits the grate area. Leave space around the plate so hot air and gases can escape. Check the grill manual for coverage limits and approved accessories.

Do I need to remove the grates to use a griddle plate?

Not always, since many griddle plates are designed to sit directly on the grates. Some grill models allow removing the grates so the plate rests on dedicated supports instead. The manual for your grill shows which setup it allows.

Can I close the lid with a cast iron griddle on a gas BBQ?

Lid-down cooking with a cast iron griddle depends on the grill maker's instructions. A full-coverage plate under a closed lid can trap heat and damage grill parts. Leaving the lid open avoids that risk when the manual gives no guidance.

Why did my cast iron griddle crack on the grill?

Cast iron griddles crack mainly from thermal shock, a rapid change in temperature. Heating a cold plate on full flame or splashing cold water on a hot one can cause it. A cracked griddle plate should be taken out of use.

What oil should I use to season a cast iron griddle plate?

A neutral oil with a high smoke point suits seasoning a cast iron griddle plate. Vegetable, canola, sunflower or rice bran oil all form a hard baked layer. Apply the oil very thinly and heat the plate until the smoking stops.

Can I cook pad Thai on a cast iron griddle plate?

Yes, a hot cast iron griddle plate handles pad Thai, fried rice and sliced pork well. Prep every ingredient first, because the plate cooks fast and leaves little time to chop. Keep one zone cooler to hold finished noodles while the rest cooks.

Read next

Latest articles