# Skimming fat and straining stock for a clear broth

How to skim foam, lift fat and strain stock with a ladle, fine mesh strainer and cheesecloth so your Thai broth turns out clear instead of greasy.

Skimming fat and straining stock is the step that turns a cloudy, greasy pot into a clear broth. You remove foam while the stock simmers and lift the fat after it cools, then pass the liquid through a [fine mesh strainer](/articles/fine-mesh-strainers-types-handles-and-how-to-choose-one/). Each of those jobs does something different for the final bowl. 

- Skim the gray foam in the first stage of simmering, before it breaks apart into the liquid.
- Keep the pot at a gentle simmer, because a hard boil pushes fat and particles back into the stock.
- Chilling the stock firms the fat on top, so a ladle or spoon lifts it off in clean pieces.
- A fine mesh strainer catches the fine particles, and cheesecloth catches what the mesh lets through.
- Skim fat for a greasy broth, but leave a little fat if you want body in the finished soup.
 

## Why skimming and straining change the broth 

Skimming removes the foam and fat that float to the surface of a simmering stock, and straining removes the particles that stay suspended in it. The two steps work on different problems, so a clear broth needs both. A pot that is never skimmed keeps that material in the liquid and turns greasy and cloudy. 

The foam that rises first is protein and impurities from bones and meat. Left alone, the foam breaks into small pieces and clouds the stock. Fat separation is a separate issue, because fat rises as an oily layer and does not mix with water. 

Stock clarity comes from small decisions made through the whole cook. Gentle heat, regular skimming and a clean strain at the end each add to it. No single step rescues a stock that boiled hard for its whole cooking time. 

## Skim the foam early in the simmer 

Skimming foam happens at the start, when the pot first comes up to a simmer and a gray layer gathers on top. Use a ladle or a shallow spoon and draw the foam off gently. Work across the surface rather than stirring it back in. 

Scum on stock keeps rising for the first stretch of cooking, so return to the pot a few times. Each pass takes only a moment and keeps the liquid cleaner. Foam removal at this stage is easier than any cleanup later. 

Discard the skimmed foam rather than returning it to the pot. Rinse the ladle between passes if the foam clings and drips. A small bowl beside the stove holds the skim so your hands stay free. 

## Hold the pot at a gentle simmer 

Simmering gently keeps foam and fat at the surface where you can reach them. A hard boil churns the liquid and drives particles back down into the stock. The pot should show small bubbles and a little movement, not a rolling boil. 

Skimming foam with a ladle is simpler when the surface is calm. Set the burner low once the pot starts to bubble and adjust as the level drops. A lid held partly over the pot helps hold the heat without trapping a boil. 

Fat separation behaves better at a gentle simmer too, because the fat gathers in a layer instead of scattering. Watch the pot rather than walking away, since a simmer can creep up to a boil. A heat diffuser under the pot smooths the temperature. 

## Lift the fat after the stock cools 

Chilling stock to lift fat is the cleanest way to deal with a greasy broth. Cool the pot safely, then move it to the refrigerator so the fat firms into a solid layer. A spoon or ladle lifts that layer off in pieces. 

Cool a hot pot quickly by setting it in a sink of cold water before it goes into the refrigerator. Do not put a large hot pot straight into a cold fridge, because the other food warms. Stir the stock now and then so it cools evenly. 

Skim fat from a warm pot with a ladle if you need the stock the same day. A gravy separator or a shallow spoon drawn across the surface works as well. Leave a thin film of fat if the finished soup needs body. 

## Strain through a fine mesh strainer 

Straining stock through a fine mesh strainer catches the small particles that skimming leaves behind. Set the strainer over a clean pot or a large bowl and ladle the stock through in batches. Do not press the solids, because pushing forces cloudy material into the broth. 

A strainer alone lets very fine particles through, so line it with cheesecloth for a clearer result. Dampen the cloth first and let the stock pass through on its own. Rinse or change the cloth when it clogs and the flow slows. 

Pour the stock from a height only if you want to aerate it, since splashing stirs up the sediment. Keep the pot steady and let gravity do the work. A second pass through a clean cloth gives a brighter, clearer broth. 

## Match the strainer to the job 

Each straining tool suits a different stage of the work. A wide strainer handles the bulk of the solids, and a fine mesh strainer follows for the smaller particles. Cheesecloth is the final pass when clarity matters. 

Stack the tools when you want a single pour to do more. Line a fine mesh strainer with a double layer of cheesecloth and set it over a deep pot. The stock passes through both in one go, and the cloth catches the finest material. 

Clean every tool before use, since old residue flavors the stock. Rinse cheesecloth thoroughly and wring it out before lining the strainer. A strainer with a handle and resting ears sits securely on the pot. 

- Wide skimmer for lifting bones and large solids
- Fine mesh strainer for small particles
- Double layer of cheesecloth for a clear finish
- Deep pot or bowl to catch the strained stock
- Ladle for moving stock in batches
 

## Keep a clear broth from turning greasy 

A clear broth stays clear when the pot is skimmed early and never boiled hard. Skim again whenever a new layer of foam appears. Strain the finished stock and chill it so any remaining fat firms on top. 

Greasy broth often comes from fat that was never separated, not from the bones themselves. Skim the surface fat after chilling and the same stock turns lean. Keep the skimmed fat in a jar if you cook with it. 

Store strained stock in a clean container with a lid and label it with what it is. Reheat it gently and skim any fat that rises. A clear stock makes a brighter base for Thai soups and sauces. 

## Questions About Skimming and Straining Stock 

### How do I skim foam off broth? 

Skim foam off broth with a ladle or shallow spoon as soon as it gathers on the surface. Draw the foam off gently and discard it rather than stirring it back in. Return to the pot a few times while the stock simmers, because more foam keeps rising. 

### How do I fix a greasy broth? 

A greasy broth is fixed by chilling the stock so the fat firms on top, then lifting that layer off with a spoon or ladle. If you need the stock the same day, draw a shallow spoon across the warm surface. Leave a thin film of fat if the soup needs body. 

### Do I need cheesecloth to strain stock? 

Cheesecloth is worth using when you want a clear broth, because it catches the fine particles a mesh strainer lets through. Line a fine mesh strainer with a damp double layer and let the stock pass through on its own. A strainer alone still works for a stock you will use in a hearty soup. 

### Why does my stock turn cloudy? 

Stock turns cloudy when it boils hard or is never skimmed, because foam and fat break into the liquid. Keeping the pot at a gentle simmer and skimming the foam early protects the clarity. Straining through cloth at the end removes what remains. 

### Should I stir the stock while it simmers? 

Stirring a simmering stock is not needed and can stir particles back into the liquid. Let the pot sit at a gentle simmer and skim the surface instead. Stir only during cooling, so the stock cools evenly.
