# Repairing clay pottery

How cracked and broken clay pottery gets repaired, from slip patches on unfired clay to food-safe mending of fired pots and when a restorer should step in.

Repairing clay pottery is possible, but the right method depends on whether the piece is still unfired or already fired in a kiln. A crack in soft, leather-hard clay is closed with slip and worked back into the body, while a fired pot needs an adhesive or a filler that matches the clay. The pages below explain crack filling, what a clay pot repair kit holds, and which repairs are safe to use with food. 

## Working on unfired and leather-hard clay 

Clay that has not yet been fired is the easiest stage for repairing clay pottery, because a patch can bond into the clay body itself. While the piece is leather-hard, you dampen the crack, press soft clay or slip into it, and blend the surface so the patch dries at the same rate. Patching clay at this stage is clay mending rather than gluing, and the joined area then goes through drying and firing with the rest of the pot. Drying cracked clay slowly and evenly reduces the chance that the repair reopens in the kiln. 

## Filling cracks in fired pottery 

A fired pot will not fuse with new clay, so clay crack repair on fired work means filling and stabilizing the gap. Thin cracks take a runny clay mortar or a repair adhesive worked in with a fine tool, while wider losses need a filler built up in layers and sanded level. Clay pot refinishing follows, with paint or a glaze touch-up over the filled area to hide the seam. Repairing clay pots this way holds the piece together and slows further cracking, though the filled line stays visible on close inspection. 

## Food safety and professional restoration 

A repaired pot that will hold food or drink needs a repair material rated food safe, and the inside surface must be sealed after the filler cures. Clay sealing matters most on the interior, because an exposed adhesive or filler can leach into food or harbor residue. For a valued piece, clay pottery restoration by a trained conservator is the safer route than a home repair. Vinegar in clay repair circulates as a folk remedy for cracks, but vinegar does not bond fired clay and should not replace a proper filler. 

## Questions about repairing clay pottery 

### Can clay pottery be repaired? 

Yes, clay pottery can be repaired, though the method changes with the state of the piece. Unfired clay is patched with slip and clay, and fired pottery is filled with an adhesive or clay mortar. The repair holds the piece together but rarely makes the crack invisible on a fired pot. 

### How do you repair cracks in clay pottery? 

Clay crack repair starts with cleaning the crack and deciding whether the pot is fired. On leather-hard clay you work slip into the gap and blend it smooth before drying and firing. On a fired pot you press in a filler in thin layers, let each layer set, then refinish the surface. 

### Does vinegar help fix clay cracks? 

Vinegar is not a reliable fix for clay cracks, despite the vinegar in clay repair advice that circulates. Vinegar cannot bond fired clay or replace a filler, and it adds moisture to unfired clay that is better handled with slip. Use a proper clay patch or adhesive instead of vinegar. 

### What is in a clay pot repair kit? 

A clay pot repair kit holds the pottery repair materials for mending fired pieces, such as a clay-based filler, an applicator, sandpaper and a sealant. Some kits include a touch-up color for clay pot refinishing. Check that a kit's filler and sealant are labeled food safe before using it on a pot that holds food.
