# Jasmine rice to water ratio by weight

Learn the jasmine rice to water ratio by weight, how many grams of water per gram of rice, and how to cook Thai jasmine rice by scale instead of a measuring cup.

The jasmine rice to water ratio by weight is about 1 part rice to 1.5 parts water. In grams, that means roughly 150 grams of water for every 100 grams of jasmine rice. Weighing both on a kitchen scale gives you a repeatable pot of fluffy Thai jasmine rice without guessing. 

- Weigh rice and water on the same kitchen scale for a repeatable batch.
- Use about 1.5 grams of water per gram of jasmine rice as a starting point.
- Rinse the rice first and drain it well, because leftover water changes the ratio.
- Adjust the water up or down slightly to suit your pot, your rice cooker and your rice.
- A scale replaces the plastic cup that comes with a rice cooker.
 

## The basic ratio in grams 

Jasmine rice to water by weight starts with a simple relationship between grams of rice and grams of water. The working ratio is 1 to 1.5, meaning the water weighs one and a half times the dry rice. A batch of 200 grams of jasmine rice therefore needs about 300 grams of water. 

This weight ratio differs from the volume advice many cooks repeat, such as one cup of rice to one and a half cups of water. Volume is unreliable because jasmine grains settle differently in every scoop. Grams measure the actual amount of rice, so the same numbers give the same result each time. 

The ratio is a starting point rather than a rule set in stone. Thai jasmine rice from a new crop holds water differently from older rice, and a tight lid or a wide pot changes evaporation. Taste the cooked rice and note how much water you used, then move the number for the next batch. 

## How to weigh rice and water 

A kitchen scale makes the [jasmine rice water ratio](/articles/jasmine-rice-to-water-ratio-and-cooking-time/) by weight easy to follow at home. Put a bowl on the scale, press tare to reset it to zero, and add the dry jasmine rice until you reach your chosen weight. Note the number, because that figure sets the water weight. 

Rinse the rice in the bowl under cool running water and swish the grains with your fingers. Drain it through a fine sieve until the water runs mostly clear, then shake out the excess. Rinsing removes loose surface starch, which otherwise makes the grains glue together. 

Return the drained rice to the cooking pot and place the pot on the scale. Add water until the total weight rises by one and a half times the rice weight, or weigh the water separately in a jug. Counting the water apart from the rice keeps the numbers clear and avoids arithmetic in your head. 

- Tare the bowl on the scale and weigh the dry jasmine rice.
- Rinse the rice and drain it in a fine sieve.
- Weigh water at about 1.5 times the rice weight.
- Add the water to the pot and start cooking.
- Rest the cooked rice off the heat before serving.
 

## Jasmine rice in a rice cooker by grams 

A jasmine rice water ratio for a rice cooker in grams follows the same 1 to 1.5 logic. Weigh the rinsed rice, multiply the weight by 1.5, and pour that much water into the cooker pot. The cooker then handles the heat and timing, while the scale handles the amounts. 

Rice cooker bowls are marked in cups, and those marks refer to the cup that came with the machine. If the cup is lost, the printed lines no longer tell you anything reliable. Grams let you fill the pot correctly without the missing cup, as long as you stay within the cooker's capacity. 

Sealed rice cookers lose little water to steam, so a batch may come out slightly wetter than rice cooked in an open pot. Reduce the water by a small amount when you cook by weight in a rice cooker, then adjust once you know how your machine behaves. Never fill the pot past its marked maximum line. 

## Cooking jasmine rice without the cup 

You can use a rice cooker without the cup by weighing the rice and water on any kitchen scale. The cup supplied with a cooker is a scoop for dry rice, not a standard measuring cup, so substituting a kitchen cup gives the wrong amount. Grams remove that confusion entirely. 

Weigh the dry rice first and keep the figure, then add water at one and a half times that weight. A small digital scale reading in single grams is enough for a household batch. If your scale only reads in ounces, convert the result before you start cooking. 

Check the cooker's inner pot for a maximum fill line and stay below it, since rice swells as it absorbs water. Spread the rice level in the pot so it cooks evenly. After cooking, let the rice rest with the lid on for a few minutes before you fluff it with a fork. 

## Thai jasmine rice and absorption 

Thai jasmine rice cooks by absorption, which means the grains take up the water you add and no water is drained away. The weight ratio matters here because every gram of water in the pot is either absorbed by the rice or lost as steam. Too much water leaves soft grains, and too little leaves a hard center. 

Jasmine rice is a long-grain aromatic rice with a soft texture when cooked. Its grains absorb water readily, so it needs less water by weight than short-grain rice used for sticky dishes. Keep the jasmine ratio near 1 to 1.5 and treat other [Thai rice types](/articles/thai-rice-varieties-and-their-cooking-uses/) as separate cases. 

The age of the rice affects absorption, and so does how long it soaked before cooking. Freshly harvested jasmine rice can need slightly less water, while dry stored rice may take a little more. Adjust the ratio for the bag in front of you rather than for rice in general. 

## Adjusting the ratio for your pot 

The jasmine rice to water ratio by weight shifts with the pot and the heat source you use. A heavy pot with a tight lid keeps steam in, so less water escapes and the rice stays moist. A thin pot with a loose lid loses more steam and may need a little extra water. 

Batch size also influences the result within a single pot. A shallow layer of rice cooks faster and loses water more quickly than a deep, full pot. When you change batch size, cook one test batch at the standard ratio and adjust from there. 

Altitude, humidity and the dryness of your kitchen all nudge absorption, so no single number fits every kitchen. Keep a short note of the rice weight, water weight and result for each batch. After two or three cooks, your own ratio becomes the reliable guide. 
| Dry jasmine rice | Water at 1 to 1.5 | 
| 100 g | 150 g | 
| 200 g | 300 g | 
| 300 g | 450 g | 
| 400 g | 600 g |  

## Mistakes that spoil the ratio 

Adding water before draining the rinsed rice is the most frequent error in weighing jasmine rice. Water clinging to the grains adds weight you did not count, so the pot ends up wetter than the ratio calls for. Drain the rice thoroughly and weigh the cooking water on its own. 

Skipping the rest after cooking traps steam and turns the grains soft. Let the rice stand off the heat with the lid on, then fluff it to release the steam. Stirring hard while the rice is hot breaks the grains and makes the dish look mushy. 

Lifting the lid during cooking releases steam and changes how much water the rice absorbs. Keep the lid closed until the cooking time ends, then check a grain at the top for doneness. If the rice is still firm, add a small splash of water and continue cooking gently. 

## Jasmine Rice Ratio Questions 

### What is the jasmine rice to water ratio by weight? 

The jasmine rice to water ratio by weight is about 1 part rice to 1.5 parts water. For 100 grams of dry jasmine rice, use roughly 150 grams of water. Treat this as a starting point and adjust for your pot, your rice cooker and the age of the rice. 

### How many grams of water for 200 grams of jasmine rice? 

For 200 grams of jasmine rice, weigh about 300 grams of water. That follows the 1 to 1.5 weight ratio used for Thai jasmine rice. Rinse and drain the rice first, then weigh the water separately so the total stays accurate. 

### Does the jasmine rice water ratio differ in a rice cooker by grams? 

The jasmine rice water ratio in a rice cooker by grams stays close to 1 to 1.5. Sealed cookers keep more steam in, so you may need slightly less water than in an open pot. Test one batch and note the weights before changing the number. 

### Can I use a rice cooker without the measuring cup? 

Yes, you can use a rice cooker without the measuring cup by weighing the rice and water on a kitchen scale. The supplied cup is a scoop made for that cooker, not a standard cup, so grams are more dependable. Weigh the dry rice, multiply by 1.5, and add that weight in water. 

### Should I rinse jasmine rice before weighing the water? 

Rinse jasmine rice before you weigh the cooking water, then drain it well in a fine sieve. Water left on the grains would add to the pot and push the ratio toward too wet. Weigh the water separately to keep the numbers clean. 

### Why is a weight ratio better than a volume ratio for jasmine rice? 

A weight ratio is better because jasmine grains settle differently in every scoop. Two cups of rice can hold different amounts of grain depending on how the cup was filled. Grams of rice and grams of water give the same batch every time.
